Nice! Recapped my NEC Multisync over the weekend. The horizontal collapse was the flyback transformer arcing — fixed it with a dab of corona dope on the focus divider. Picture is clean now. The Trinitron you have is the easier recap, those caps are through-hole.
Color me jealous. I have a Mitsubishi Diamondtron that is developing a slight green tint. Probably the green drive transistor. Adding it to the to-do list. Did you reflow the solder joints on the flyback while you had the chassis out?
Sony PVMs have the same green drive issue if the chassis has been run hot. Worth pulling the cover and reflowing the solder joints on the video output board before swapping parts. Cold joints on the green channel are more common than transistor failure.