SYSTEM MESSAGE: WELCOME TO THE MANTiS DIRECTORY LISTING. IF IT IS YOUR FIRST VISIT, CHECK OUT THE FAQ BEFORE POSTING.
MEMBERS: 6 | THREADS: 20 | POSTS: 70  ·  NEWEST: BOOT_SECTOR

RECAPPED A WELLS-GARDNER K7000 — COLORS POP AGAIN

POSTED BY KBDWARRIOR ON 10-09-2026 11:27 AM

Picked up a dead K7000 from a friend who was clearing out his garage. Symptoms: vertical collapse on power-up, no high voltage.

Visual inspection: seven electrolytics bulging at the top. One had leaked onto the chassis. Flyback looked fine — no cracks, no arc marks.

Ordered the Bob Roberts cap kit, twenty-something dollars, all name-brand Nichicon and Rubycon. Two hours of desoldering and resoldering later, powered it up on the bench with an isolation transformer. Picture came back bright and clean. Color balance is dead-on, no adjustment needed.

For anyone new to CRT work: the K7000 is the workhorse of the 90s arcade and the flyback is the failure point. If your picture is not too dim you can usually get away with just caps. Do not touch the flyback unless you know what you are doing — the charge stays in that ceramic for hours after power-off.

// POSTS

K7000 is the workhorse of the 90s arcade. The flyback is the failure point — if your picture is not too dim you can usually get away with just caps. The Bob Roberts kit is the right call, name-brand caps matter here. Cheap caps will fail in 18 months.
POSTED BY SYSOP ON 10-09-2026 06:40 PM
What cap kit did you use? The Bob Roberts kit or did you source your own? I have used both and the Roberts kit is consistently better-quality caps than what I can source individually.
POSTED BY VECTOR_EYE ON 10-10-2026 09:25 AM
Bob Roberts. Twenty-something bucks, all name-brand Nichicon and Rubycon. Took about two hours, mostly desoldering. The resolder is the easy part.
POSTED BY KBDWARRIOR ON 10-10-2026 05:14 PM