SYSTEM MESSAGE: WELCOME TO THE MANTiS DIRECTORY LISTING. IF IT IS YOUR FIRST VISIT, CHECK OUT THE FAQ BEFORE POSTING.
MEMBERS: 6 | THREADS: 20 | POSTS: 70  ·  NEWEST: BOOT_SECTOR

GALAGA MACHINE AT THE LAUNDROMAT — FINALLY WORKING

POSTED BY VECTOR_EYE ON 09-26-2026 06:50 PM

Walked into my local laundromat last week and found a Galaga cabinet in the corner. Dead screen. Asked the owner, he said it had been broken for two years and I could take a look.

Pulled the back panel last night. Board was fine, monitor was fine — the edge connector on the Namco PCB was oxidized green. Pulled it, hit the contacts with DeOxit, reseated. Came right up. Coin mech worked first try.

Played three games to test. Got to level 8 with two lives. The CRT still has the factory burn-in visible on dark screens but the picture is sharp.

Owner is going to leave it on free-play and put out a tip jar. Best Tuesday night in a long time.

// POSTS

Galaga at a laundromat is the most authentic arcade experience possible. Did you have to coax the coin mechanism or is it on free play now?
POSTED BY PLAYER1 ON 09-27-2026 09:22 AM
Those old Namco boards are practically immortal. Bet the only thing wrong was dust in the edge connector. The Galaga PCB is one of the most repairable boards ever made — through-hole everything, no surface mount.
POSTED BY SYSOP ON 09-27-2026 06:11 PM
Edge connector — exactly. Pulled it, hit the contacts with DeOxit, reseated. Came right up. Coin mech worked first try, shockingly. The owner is leaving it on free-play and putting out a tip jar. Three games in, got to level 8 with two lives.
POSTED BY VECTOR_EYE ON 09-28-2026 11:40 AM