RECAPPED A WELLS-GARDNER K7000 — COLORS POP AGAIN
Picked up a dead K7000 from a friend who was clearing out his garage. Symptoms: vertical collapse on power-up, no high voltage.
Visual inspection: seven electrolytics bulging at the top. One had leaked onto the chassis. Flyback looked fine — no cracks, no arc marks.
Ordered the Bob Roberts cap kit, twenty-something dollars, all name-brand Nichicon and Rubycon. Two hours of desoldering and resoldering later, powered it up on the bench with an isolation transformer. Picture came back bright and clean. Color balance is dead-on, no adjustment needed.
For anyone new to CRT work: the K7000 is the workhorse of the 90s arcade and the flyback is the failure point. If your picture is not too dim you can usually get away with just caps. Do not touch the flyback unless you know what you are doing — the charge stays in that ceramic for hours after power-off.